Bushings
Bushings » Self Lubricating Inch » Small Bore

NPB 09NU06 Bearing Inch Series | Self-Lubricating Bearing

NPB Part No.
09NU06

Specifications

Dimensional Diagram
Inch or Metric
Inch
Lubrication
Self-lubricating
Bearing Length
3/8"
Nominal Bearing Bore
9/16"
Recommended Shaft Diameter
.5615 - .5605"
Recommended Housing Diameter
.6559 - .6566"
Installed Bearing Inside Diam.*  ID
.5617 - .5644"
Flanged
No
Materials
  • Liner: PTFE-lead overlay
  • Substrate: Sintered bronze
  • Backing: Plated low-carbon steel
Loads - P
  • Dynamic loads up to 20,000 PSI
  • Static loads up to 36,000 PSI
  • Compressive yield strength of 44,000 PSI
Speed - V
  • Up to 1000 FPM unlubricated
  • Up to 2000 FPM lubricated
Performance - PV
  • PV to 50,000 PSI - FPM - continuous operation
  • PV to 100,000 PSI - FPM - intermittent operation
Temperature Range
–328°F to +536°F
Coefficient of Friction
0.02 - 0.20 Static/Dynamic
Shaft Finish
  • A surface finish of better than 16 micro inches is recommended
  • Above 32 micro inches, bearing life is reduced by more than 50%
* When installed in a rigid steel or cast-iron housing
Length Tolerances: Up to and including 3/8 inch I.D. or length – ±0.015 inch. Above 3/8 inch I.D. or length – ±0.010 inch

Interchange

National Precision Bearing Part No 09NU06 is an interchangable replacement for these common bearing part numbers:

Isostatic Bearing
09TU06
Garlock Bearing
09DU06