Ball Bearings:
6200 Series
 |
 |
||||
 |
 |
 |
 |
 |
 |
| 6200 Open |
6200Z 1 Shield |
6200ZZ 2 Shields |
6200RS 1 Contact Seal |
62002RS 2 Contact Seals |
6200NR Retain. Ring, Groove on OD |
6200 SERIES
Light Ball Bearings
The 6200 Series bearings feature deep, honed raceways, resulting in a perfectly balanced bearing. Their Conrad construction and precise ball complement selection allow for maximum performance. These bearings are available in open, sealed or shielded configurations. The 6200 series is also available in stainless steel.
| 6200 SERIES BALL BEARINGS | LIGHT | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NPB Part No. |
Bore | Outside Diameter | Width | Max. Fillet Radius |
Balls | Static Load Lbs. |
Dynamic Load Lbs. |
||||||
| MM | Inch | Tol. | MM | Inch | Tol. | Tol. | +.0000 -.0050 |
No. | Diam. | ||||
| MM | Inch | ||||||||||||
| 6200 | 10 | .3937 | -.0003 | 30 | 1.1811 | -.0004 | 9 | .3543 | .025 | 8 | 3/16 | 500 | 885 |
| 6201 | 12 | .4724 | -.0003 | 32 | 1.2598 | -.0005 | 10 | .3937 | .025 | 7 | 7/32 | 595 | 1055 |
| 6202 | 15 | .5906 | -.0003 | 35 | 1.3780 | -.0005 | 11 | .4331 | .025 | 8 | 7/32 | 675 | 1180 |
| 6203 | 17 | .6693 | -.0003 | 40 | 1.5748 | -.0005 | 12 | .4724 | .025 | 8 | 1/4 | 890 | 1500 |
| 6204 | 20 | .7874 | -.0004 | 47 | 1.8504 | -.0005 | 14 | .5512 | .040 | 8 | 5/16 | 1390 | 2220 |
| 6205 | 25 | .9843 | -.0004 | 52 | 2.0472 | -.0005 | 15 | .5906 | .040 | 9 | 5/16 | 1565 | 2415 |
| 6206 | 30 | 1.1811 | -.0004 | 62 | 2.4409 | -.0005 | 16 | .6299 | .040 | 9 | 3/8 | 2255 | 3360 |
| 6207 | 35 | 1.3780 | -.0005 | 72 | 2.8346 | -.0005 | 17 | .6693 | .040 | 9 | 7/16 | 3070 | 4430 |
| 6208 | 40 | 1.5748 | -.0005 | 80 | 3.1496 | -.0005 | 18 | .7087 | .040 | 9 | 15/32 | 3520 | 5035 |
| 6209 | 45 | 1.7717 | -.0005 | 85 | 3.3465 | -.0005 | 19 | .7480 | .040 | 9 | 1/2 | 4005 | 5655 |
| 6210 | 50 | 1.9685 | -.0005 | 90 | 3.5433 | -.0006 | 20 | .7874 | .040 | 10 | 1/2 | 4450 | 6065 |
| 6211 | 55 | 2.1654 | -.0006 | 100 | 3.9370 | -.0006 | 21 | .8268 | .060 | 10 | 9/16 | 5630 | 7500 |
| 6212 | 60 | 2.3622 | -.0006 | 110 | 4.3307 | -.0006 | 22 | .8661 | .060 | 10 | 5/8 | 6955 | 9065 |
| 6213 | 65 | 2.5591 | -.0006 | 120 | 4.7244 | -.0006 | 23 | .9055 | .060 | 10 | 21/32 | 7665 | 9900 |
| 6214 | 70 | 2.7559 | -.0006 | 125 | 4.9213 | -.0008 | 24 | .9449 | .060 | 10 | 11/16 | 8415 | 10715 |
Material: Standard SAE 52100
Stainless steel, bronze, plastic/polymer and ceramic bearings available upon request.
Stainless steel, bronze, plastic/polymer and ceramic bearings available upon request.
