Ball Bearings:
Stainless Steel
SS6800 SERIES
Extra Light Stainless Steel Ball Bearings
The deep thin-walled ball bearings of SS6800 series will bear moderate axial load as well as radial load. The SS6800 has a lower coeficiancy of friction and higher speed rating compared to other ball bearing types of the same size. When the use of a thrust type ball bearing is not suitable due to high speeds the SS6800 series can be used to bear pure axial loads. The SS6800 series is available in open, sealed or shielded configurations.
| 6800 SERIES BALL BEARINGS - EXTRA LIGHT | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NPB Part No. |
Bore (mm) |
O.D. (mm) |
Width (mm) |
Load Rating(KN) | Apx. Weight (kg) |
||||||||
| Cor | Cr | ||||||||||||
| SS 6800 | 10 | 19 | 5 | 0.93 | 1.80 | 0.005 | |||||||
| SS 6801 | 12 | 21 | 5 | 1.00 | 1.90 | 0.0055 | |||||||
| SS 6802 | 15 | 24 | 5 | 1.30 | 2.10 | 0.006 | |||||||
| SS 6803 | 17 | 26 | 5 | 1.50 | 2.20 | 0.007 | |||||||
| SS 6804 | 20 | 32 | 7 | 2.20 | 3.50 | 0.015 | |||||||
| SS 6805 | 25 | 37 | 7 | 2.90 | 4.30 | 0.017 | |||||||
| SS 6806 | 30 | 42 | 7 | 3.60 | 4.70 | 0.019 | |||||||
| SS 6807 | 35 | 47 | 7 | 4.00 | 4.90 | 0.023 | |||||||
| SS 6808 | 40 | 52 | 7 | 4.40 | 5.10 | 0.026 | |||||||
| SS 6809 | 45 | 58 | 7 | 5.60 | 6.40 | 0.03 | |||||||
| SS 6810 | 50 | 65 | 7 | 6.10 | 6.60 | 0.043 | |||||||
Material: Ring & Ball are 440C / cage and shield material are 300 series.
Bronze, plastic/polymer and ceramic bearings available upon request.
Bronze, plastic/polymer and ceramic bearings available upon request.
