LOAD SERIES

Standard Duty Metric
Extended Inner Race Unsealed

LOAD SERIES STANDARD DUTY METRIC EXTENDED INNER RACE UNSEALED
Ball Bore Diam. B		Part No RFQ per item	Outside Diam (1) D		Ball Width W		Race Width T		Ball Diam BD	Tilt Angle	Shldr Diam O	Shaft Fillet C1	Hsng Fillet C2	Radial Loads (2)
Nom MM	Tol		Nom	Tol	Nom	Tol	Nom	Tol	Ref	Deg	Ref	Max	Max	Static	Dyn
12	+.018	GEEW12ES	22	-.009	12	-.180	7	-.240	18	4	14.5	.3	.3	12,153	2,431
16	+.018	GEEW16ES	28	-.009	16	-.180	9	-.240	23	4	18.7	.3	.3	19,804	3,965
20	+.021	GEEW20ES	35	-.011	20	-.210	12	-.240	29	4	23.1	.3	.3	32,854	6,754
25	+.021	GEEW25ES	42	-.011	25	-.210	16	-.240	35.5	4	29.2	.6	.6	54,007	10,804
32	+.025	GEEW32ES	52	-.013	32	-.250	18	-.300	43	4	36.3	.6	1.0	73,128	14,735
40	+.025	GEEW40ES	62	-.013	40	-.250	22	-.300	53	4	44.8	.6	1.0	112,507	22,509
50	+.025	GEEW50ES	75	-.013	50	-.250	28	-.300	66	4	55.9	.6	1.0	175,504	35,104
63	+.030	GEEW63ES	95	-.015	63	-.300	36	-.400	83	4	69.7	1.0	1.0	285,754	57,374
80	+.030	GEEW80ES	120	-.015	80	-.300	45	-.400	105	4	88.7	1.0	1.0	450,009	90,005
100	+.035	GEEW100ES	150	-.018	100	-.350	55	-.500	130	4	110.1	1.0	1.0	686,251	137,254
125	+.040	GEEW125ES	180	-.025	125	-.400	70	-.500	160	4	136.5	1.0	1.0	1,068,754	213,759
160	+.040	GEEW160ES	230	-.030	160	-.400	80	-.600	200	4	172.0	1.0	1.0	1,530,008	308,254
200	+.046	GEEW200ES	290	-.035	200	-.460	100	-.700	250	4	213.0	1.0	1.0	2,385,004	477,009
Nom MM	Tol	Part No RFQ per item	Nom	Tol	Nom	Tol	Nom	Tol	Ref	Deg	Ref	Max	Max	Static	Dyn
Ball Bore Diam. B			Outside Diam (1) D		Ball Width W		Race Width T		Ball Diam BD	Tilt Angle	Shldr Diam O	Shaft Fillet C1	Hsng Fillet C2	Radial Loads (2)

• ⁽¹⁾ All tolerances in this catalog are before the outer races are fractured and before application of dry film lubricant
• ⁽²⁾ Ultimate loads for the bearings in this catalog are approximately 1.5 times the catalog load ratings

All dimensions are metric.

• For numeric bore size conversion between manufacturers see numerical interchange table.