Spherical Plain Bearings:
Metric Series
LOAD SERIES
Self-Lubricating Metric Sealed
Features:
• Hard chrome plated ball
• PTFE liner system
• Hard chrome plated ball
• PTFE liner system
| LOAD SERIES SELF-LUBRICATING METRIC SEALED | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ball Bore Diam. B |
Part No RFQ per item |
Outside Diam (1) D |
Ball Width W |
Race Width T |
Ball Diam BD |
Tilt Angle  |
Shldr Diam O |
Shaft Fillet C1 |
Hsng Fillet C2 |
Radial Loads (2) |
|||||
| Nom MM |
Tol | With Seals |
Nom | Tol | Nom | Tol | Nom | Tol | Ref | Deg | Ref | Max | Max | Static | Dyn |
| 35 | -.012 | GE35ET-2RS | 55 | -.013 | 25 | -.120 | 20 | -.300 | 47 | 6 | 37.9 | .6 | 1.0 | 50,500 | 25,250 |
| 40 | -.012 | GE40ET-2RS | 62 | -.013 | 28 | -.120 | 22 | -.300 | 53 | 6 | 43.0 | .6 | 1.0 | 63,050 | 31,550 |
| 45 | -.012 | GE45ET-2RS | 68 | -.013 | 32 | -.120 | 25 | -.300 | 60 | 7 | 48.8 | .6 | 1.0 | 81,050 | 40,550 |
| 50 | -.012 | GE50ET-2RS | 75 | -.013 | 35 | -.120 | 28 | -.300 | 66 | 6 | 53.9 | .6 | 1.0 | 99,050 | 49,550 |
| 60 | -.015 | GE60ET-2RS | 90 | -.015 | 44 | -.150 | 36 | -.400 | 80 | 6 | 65.5 | 1.0 | 1.0 | 156,400 | 77,675 |
| 70 | -.015 | GE70ET-2RS | 105 | -.015 | 49 | -.150 | 40 | -.400 | 92 | 6 | 75.6 | 1.0 | 1.0 | 198,050 | 99,050 |
| 80 | -.015 | GE80ET-2RS | 120 | -.015 | 55 | -.150 | 45 | -.400 | 105 | 5 | 85.9 | 1.0 | 1.0 | 256,550 | 128,300 |
| 90 | -.020 | GE90ET-2RS | 130 | -.018 | 60 | -.200 | 50 | -.500 | 115 | 5 | 96.0 | 1.0 | 1.0 | 308,300 | 156,400 |
| 100 | -.020 | GE100ET-2RS | 150 | -.018 | 70 | -.200 | 55 | -.500 | 130 | 6 | 106.4 | 1.0 | 1.0 | 389,300 | 194,675 |
| 110 | -.020 | GE110ET-2RS | 160 | -.025 | 70 | -.200 | `55 | -.500 | 140 | 6 | 116.5 | 1.0 | 1.0 | 418,550 | 209,300 |
| 120 | -.020 | GE120ET-2RS | 180 | -.025 | 85 | -.200 | 70 | -.500 | 160 | 6 | 127.5 | 1.0 | 1.0 | 607,550 | 301,550 |
| 140 | -.025 | GE140ET-2RS | 210 | -.030 | 90 | -.250 | 70 | -.600 | 180 | 7 | 147.0 | 1.0 | 1.0 | 675,100 | 337,550 |
| 160 | -.025 | GE160ET-2RS | 230 | -.030 | 105 | -.250 | 80 | -.600 | 200 | 8 | 167.5 | 1.0 | 1.0 | 856,000 | 434,300 |
| 180 | -.025 | GE180ET-2RS | 260 | -.035 | 105 | -.250 | 80 | -.700 | 225 | 6 | 189.0 | 1.0 | 1.0 | 968,000 | 486,100 |
| 200 | -.030 | GE200ET-2RS | 290 | -.035 | 130 | -.300 | 100 | -.700 | 250 | 7 | 209.5 | 1.0 | 1.0 | 1,350,100 | 675,050 |
| 220 | -.030 | GE220ET-2RS | 320 | -.040 | 135 | -.300 | 100 | -.800 | 275 | 8 | 229.5 | 1.0 | 1.0 | 1,473,800 | 753,800 |
| 240 | -.030 | GE240ET-2RS | 340 | -.040 | 140 | -.300 | 100 | -.800 | 300 | 8 | 249.5 | 1.0 | 1.0 | 1,620,500 | 810,100 |
| 260 | -.035 | GE260ET-2RS | 370 | -.040 | 150 | -.350 | 110 | -.800 | 325 | 7 | 270.0 | 1.0 | 1.0 | 1,946,300 | 967,550 |
| 280 | -.035 | GE280ET-2RS | 400 | -.040 | 155 | -.350 | 120 | -.800 | 350 | 6 | 290.5 | 1.0 | 1.0 | 2,250,200 | 1,126,000 |
| 300 | -.035 | GE300ET-2RS | 430 | -.045 | 165 | -.350 | 120 | -.900 | 377 | 7 | 310.5 | 1.0 | 1.0 | 2,430,100 | 1,216,000 |
| Nom | Tol | With Seals |
Nom | Tol | Nom | Tol | Nom | Tol | Ref | Deg | Ref | Max | Max | Static | Dyn |
| Ball Bore Diam. B |
Part No RFQ per item |
Outside Diam (1) D |
Ball Width W |
Race Width T |
Ball Diam BD |
Tilt Angle |
Shldr Diam O |
Shaft Fillet C1 |
Hsng Fillet C2 |
Radial Loads (2) |
|||||
- (1) All tolerances in this catalog are before the outer races are fractured and before application of dry film lubricant
- (2) Ultimate loads for the bearings in this catalog are approximately 1.5 times the catalog load ratings
All dimensions are metric.
• For numeric bore size conversion between manufacturers see numerical interchange table.
